3 steps flexible diamond polishing pads resin bond wet use

3 steps wet use resin bond flexible diamond polishing pads

This type 3 steps diamond pads are usually used for wet polishing various stones, they are made by high grade diamonds and quality resin, designed greatly for polishing granite marble and engineered stone in short time, it just needs 3 steps, the surface of stone will be as smooth as the ones using the normal 8 step polishing pads.

Grit 1, very sharp, wear-resistant, rough grinding is very fast, suitable for marble, terrazzo rough grinding, terrazzo, cement floor.
Grit 2, Clean the scratch, good fineness, can quickly scratch away.
Grit 3, polishing brightness, brightness up to 1000, directly after grinding crystallization.

3-step diamond polishing pads for natural and engineered stone is an efficient and cost effective way for polishing countertops and slabs with polishers. They save much time and cost less compared to traditional 8-step pads.

Using from rough grit to fine grit, there is no need to use a final polishing disc, however if finally via buff polishing will get a better polishing result. A significant time savings of 35–45% can be achieved using this system. It is important not to mix this system with normal diamond polishing pads, as the grits will not coincide, therefore defeating the step savings.

It is used by portable grinder or other manual operated machines. Velcro color coded for easy identification along with Velcro backed for quick pads changes.

2000-5000 RPM (Recommended at 4500).

Wet polishing with sufficient water feeding, dry use pads may be available.

The above specifications & photos are for reference, other specification may be available as per demand.