|
250mm-800mm Diamond Saw Blade for Edge Cutting of
Marble Slabs
Diamond
saw blades for slab edge cutting of marble, limestone, slate,
various soft stones without quartz, cutting slabs to tiles or as per
order request, used on bridge cutting machines, manual handling cutting
machines or table saw machines.
The most demanding sizes of edge cutting saw blade for marble is
14”/350mm and 16”/400mm to cut 2-5cm thickness marble slabs or
strips.
The following are the different designs of marble saw blades:
|
Diameter
(mm/Inch) |
Hole
(mm) |
Segment Height
(mm) |
Segment No.
(pcs/set) |
Steel Blank Type |
Welding Method |
|
250mm(10") |
50/60 |
7/8/10 |
18 |
Normal
&
Silent |
Silver Welded |
|
300mm(12") |
50/60 |
7/8/10 |
21 |
|
350mm(14") |
50/60 |
7/8/10 |
24/25 |
|
400mm(16") |
50/60 |
8/10 |
28 |
|
450mm(18") |
50/60 |
8/10 |
32 |
|
500mm(20") |
50/60 |
8/10 |
36 |
|
550mm(22") |
50/60 |
8/10 |
38 |
|
600mm(24") |
50/60 |
8/10 |
42 |
|
625mm(25") |
50/60 |
8/10 |
44 |
|
700mm(28") |
50/60 |
8/10/12 |
50 |
|
725mm(28") |
50/60 |
8/10/12 |
50 |
|
750mm(30") |
50/60 |
8/10/12 |
52 |
|
800mm(32") |
50/60 |
8/10/12 |
46 |
Silent & None Silent
Saw Blades is Available!
Welding method: Silver welding
by high frequency welding machine.
Wet use only, Fast & Easy
cutting, long life, very less or no chips.
The above specifications and photos are for reference, other specifications
may be available as per customer's demand.
There are two types of
saw blanks for choice, normal (non-silent) saw blank and
silent(sandwich, less noise). When cutting on stone, normal saw
blade sounds much louder, silent blade is sandwich structure with a
copper layer in between, this helps decreasing the noise and people
call it silent cut. The silent steel blank is mostly with U slot
while the normal saw blade is with Key Slot, it is a regular design.
|
