Diamond Polishing Pads

for Stone Wet Use

for Stone Dry Use

for Edge Polishing

for Floor Polishing

Pad's Backer

Electroplated Pads

Products Quick View

Diamond Drill Bits

Diamond Drum Wheels

Diamond Fickert Abrasives

Diamond Frankfurts

Diamond Finger Bits

Diamond Grinding Cup Wheels

Diamond Grinding Pads

Diamond Grinding Discs

Diamond Milling Wheels

Diamond Plugs

Diamond Polishing Pads

Diamond Polishing Discs

Diamond Profiling Wheels

Diamond Rollers

Diamond Saw Blades

Diamond Segments

Diamond Squaring Wheels

Diamond Wire Saw

Vacuum Brazed Tools

3 steps resin bond wet use flexible diamond polishing pads

This type 3 steps diamond pads are usually used for wet polishing various stones, they are made by high grade diamonds and quality resin, designed greatly for polishing granite marble quartz and artificial stone in short time, it just needs 3 steps, the surface of stone will be as smooth as the ones using the normal 7 or 8 steps polishing pads.

Grit 1, very sharp, wear-resistant, rough grinding is very fast, suitable for marble, terrazzo rough grinding, terrazzo, cement floor.
Grit 2, Clean the scratch, good fineness, can quickly scratch away.
Grit 3, polishing brightness, brightness up to 1000, directly after grinding crystallization.

3-step diamond polishing pads for natural and engineered stone is an efficient and cost effective way for polishing countertops and slabs with polishers. They save much time and cost less compared to traditional 8-step pads.

Using from rough grit to fine grit, there is no need to use a final polishing disc, however if finally via buff polishing will get a better polishing result. A significant time savings of 35–45% can be achieved using this system. It is important not to mix this system with normal diamond polishing pads, as the grits will not coincide, therefore defeating the step savings.

It is used by portable grinder or other manual operated machines such as angle grinder or air polisher.

Velcro color coded for easy identification along with Velcro backed for quick pads changes.

The 3mm thickness is good for durability and life extension.

2000-5000 RPM (Recommended at 4500).

White Resin bond is specifically designed for Engineered Stone Materials to not discolor the surface.

Wet polishing with sufficient water feeding, dry use pads may be available.

The above specifications & photos are for reference, other specification may be available as per demand.

Relevant Products: